Superstar

Send

Introducing a nursery that fully meets the interests of the child: for the boy - in cool blue tones.

IGNIT!
The perfect setting for a music-enthusiastic kid. Here are some of our ideas.
PHOTO FRAMES
If you still have the old vinyl records (pictured at the top left), stick the portraits of your child’s idols in the center on them.
TATTOO ON THE WALL
Black self-adhesive film is an ideal material for applications like a musical key, player, etc. (photo in the upper middle).

STAR POOF
It is easy to decorate a maxi pillow filled with styrofoam crumb in the right style, and the decor can be sewn or drawn.
SIZE 75 x 75 cm.
YOU NEED: polka dot taffeta shir. 140 cm, length 80 cm; longitudinal strip twill shir. 140 cm, length 80 cm; tulle width 140 cm, length 65 cm; the remainder of the white strip of jersey, shir. 4 cm, the length depends on the size of the name; artificial leather with metallized coating 15 x 61 cm; residues of artificial or genuine leather in black, white and red; black resistant felt-tip pen; sewing threads; cigarette paper; glue stick; styrofoam packing of 70 l.
CUT TO: the data below already contains 1 cm of allowances.
From fabric to polka dots:
Back side of pillow size 77 x 77 cm
The front side of the pillow size. 63 x 63 cm
From tulle:
The front side of the pillow size. 63 x 63 cm
Striped fabric:
4 strips for a border of width. 25 cm, length 77 cm.
Metallic coated leather:
Plank 61 cm long, wide 15 cm
HOW TO MAKE: mark the front side of the polka-dot fabric pillow onto the part from the tulle seamy to the front side, then treat it as a single-layer part. On the planks, mow the front corners, as shown in the diagram. Stitch the ends of the plank into the frame; start and end seam at dist. 1 cm from long sections, iron the seam allowances. Stitch the shorter edges of the planks face-to-face to the cuts of the front side of the pillow; at the corners, precisely align the seams. Iron allowances on the front side of the pillow.
Slat a faux leather strap along one side of the seam on the front of the pillow. Stitch the edges of the plank to the edge.
Copy the motives in the right size onto the tissue paper. From the remnants of the skin, cut circles and rectangles, as well as the letter M, as shown in the photograph of the model. Edges of motives to stitch to the edge. Draw lines and inscription with marker. Name written on tissue paper, letters approx. 10 cm. Paste tissue paper with the name under the bar exactly in the middle of the front side of the pillow. Place the middle of the jersey strip on the inscription and sew manually with “back needle” stitches. Remove the tissue paper.
Stitch the long edges of the plank face-to-face on the slices of the back side of the pillow, leave a 20 cm hole on one seam for turning out. Turn out the pillow and fill it with filler. Sew the hole in the seam manually with small stitches.

FABRIC GUITAR
Either a toy or a pillow ... The main thing is to make the strings brighter!
PATTERN:
Extra pattern of a light green flower on a sheet of patterns C, details 1 and 2.
SIZE 30 x 80 cm

YOU NEED: taffeta with a star pattern shir. 140 cm, length 50 cm; longitudinal strip twill shir. 140 cm., Length 50 cm; the remains of red wool yarn, the remains of red fabric; thread for sewing, thread for embroidery (floss) of red color; tissue paper, cotton wool for stuffing, needle for embroidery with a sharp tip; 2 large and 3 small buttons.
Seam allowances: at all seams and sections 1 cm
CUT TO:
From fabric with a star pattern:
1 guitar case 2x
a) a fringing strip for the case with a total length of 131 cm, width. 4 cm
Striped fabric:
2 guitar neck 2x
b) a fringing strip for a signature stamp with a total length of 103 cm, width 4 cm
c) front extension for guitar neck 8 cm long, wide 7 cm (make sure that the strips of strings are docked!)
d) a 9 cm long moth, width 4 cm
f) loop 10 cm long, wide 5 cm
HOW TO MAKE: On the continuation details for the guitar neck, iron inward allowances along 8-cm sections and on one 7-cm section. On the inside, continue the seam extension onto the upper edge of the upper side of the body along the alignment line, grind the edges to the edge. Scribble the upper side of the neck to the upper side of the body, the back of the neck to the back of the body (mark 1) exactly to the marked seam line of the side sections of the guitar.
Iron on the seamy side of the loop allowances along the long sections, fold the strip in half and grind. Lay the loop on the face on the front side of the case, twist the ends and pin them along the alignment lines, sew to the edge and at a distance of 5 mm.
Iron the allowances on the underside. Fold the muzzle along the outboard. side inwards, stitch the folds to the edge like pinches. From the remnants of the striped fabric, cut 2 triangles for the ends of the muzzle size. on the lower edge of 4 cm, on the lateral beveled edges of 3.5 cm. Slices to iron on the width. 7 mm inside out. Sew the chamfered edges manually with small stitches to the ends of the bones, the sharp ends lie on the pintle. Align the mock along the alignment lines on the front side of the body, chop, sew on one long edge and the ends with triangles.
Stitch in long strips fringing strips for the body and neck. Then pour long strips into rings. The edges of the upper parts of the body and neck, face-to-face, pin on one edge of the fringing strip, while on the curves of the body and neck, make numerous notches and combine the fabric pattern at the seams. Stitch up. Also chop and stitch the lower sides of the body and neck and the fringing strips, while on one seam directly above the alignment line, leave a hole for turning out approx. 10 cm. Turn out and stuff with cotton. Sew the hole in the seam. Stitch seams on the neck as pinches from the beginning of the hen to the stitches so that it looks like strings.
From red fabric cut 3 circles of dia. 2.5 cm. Sew the circles, as shown in the photo, manually with straight stitches on the upper side of the body with threads for embroidery in 3 additions.
Sew buttons as stitches: 2 at the short end and 3 at the long. For the “strings”, tie 4 woolen threads to the buttons, hold them under the binder. Thread the woolen threads into the needle and pierce them through the underrun at regular intervals, tie knots at the lower end of the underrun.
Photo above: Layout plans for fabric shir. up to 150 cm
When cutting fabric in two layers, the front side lies inside.

SKATEBOARD SHELVES
Old skateboards are ideal material for decorating a children's room. Each board must be fixed with two metal corners mounted on the wall.

HEADPHONES PILLOWS
They are sewn easily and quickly, and sleeps on them very sweetly ...
SIZE 40 x 40 cm.
YOU NEED: taffeta with polka dots and with stars shir. 140 cm, length 45 cm; longitudinal strip twill shir. 140 cm, length 45 cm, tulle width. 140 cm, length 30 cm; the remainder of artificial leather with a metallized coating size. 20 x 30 cm; a flap of red cloth; threads for sewing, threads for embroidery (floss) of red and black color; cigarette paper; glue stick; 8 punched blades dia. 2 cm; 2 fillers for pillows size. 40 x 40 cm.
CUT TO (1 pillow):
From fabric with polka dots and from fabric with a star pattern:
The front side of the pillow size. 42 x 42 cm
Striped fabric:
Back side of pillow size 42 x 42 cm
From tulle:
Circle diam. 30 cm
HOW TO MAKE:
Put a circle of tulle on the front side of the pillow, combining the lines of the middle, sew on dist. OK. 5 mm from the cut by hand with large stitches "back to the needle" with black thread floss in 3 additions.

Copy the motive, cut 4 motives from the skin for each pillow. 4 motives to stick on the corners of the front sides of the pillow so that they are in contact with the edge of the circle of tulle. In the middle of motives to break blocks. Flaps of red fabric OK. Place 10 x 10 cm on the motifs under the front sides of the pillow, pin.Sew leather motifs with stitches “forward needle” at a distance of 2 mm from the edges, grabbing shreds of red fabric. From red fabric cut mugs diam. 2.5 cm, prick at the corners for motifs, sew with large stitches in red floss in 3 additions.
Fold the front and back sides of the pillow face to face, leave a hole for turning out approx. 15 cm. Unscrew the pillow, fill it, sew a hole in the seam.
Photo: Andreas Ahmann; production: Rushana Jennings.

Send