Phased handbag manufacturing

It happened to you, getting ready, you understand, it would be necessary to take some trifle, and not a hunt to drag a large bag. It happens to me :) In order not to shove the necessary in my pockets, you can sew such a handbag

This model was sewn from the remnants of red faux suede, complementing it with pieces of black fabric.
By the same principle, you can collect different interesting little purses that are different from each other. See the variations in the links1. Making the back of the bag:
and. assembly from suede pieces using a decorative seam. Duplicate the material as a base and assemble the panel with decorative stitches on it. i.e., these lines will perform 2 functions at once: assembly of panel parts, as well as fixing of the panel on duplicate material.
This item is laid down in case of sewing from residues, if there are pieces of the right size, it can be omitted.
b. edging of the upper edge. Sewing the oblique beikus of the face of the panel, bend it to the wrong side, but do not sew immediately, but only pin it.



2. Production of the front panel of the bag:
and. embroidery

b. add a "corner" (optional)


at. edging of the upper edge (similar to the rear panel) 3. Sew the zipper, at this stage not only the zipper is fixed, but also


4. If necessary, trim the edges of the front and back panels of the bag

5.to connect the panels of the bag, before making a line, make sure that the zipper is open :)

6. cut the seal to the seam, trim the corners.

turn on face

7. sew in the cord


8. prepare the lining

Pin the upper edge of the lining, and then sew it with a blind stitch.

and wow, the bag is ready: